ᱜᱞᱤᱪᱤᱝ ᱵᱚᱨᱰ ᱞᱟᱹᱜᱤᱫ ᱞᱤᱢᱴᱤᱰᱤᱴᱤ ᱨᱮ ᱯᱟᱲᱦᱟᱣ ᱞᱟᱹᱜᱤᱫ

16. ᱮᱛᱚᱦᱚᱵ ᱨᱮ ᱩᱫᱩᱜ ᱠᱟᱱ ᱞᱮᱠᱟ ᱛᱮ ᱟᱨᱴ ᱨᱮ ᱵᱚᱫᱚᱞ ᱠᱚ ᱩᱫᱩᱜ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱛᱮ ᱥᱯᱟᱨᱠᱞᱤᱝᱠ ᱫᱚ ᱥᱮᱞᱤᱝ ᱨᱮ ᱞᱮᱠᱟ ᱞᱮᱠᱟ ᱧᱮᱞᱚᱜ ᱠᱟᱱᱟ; ᱢᱮᱴᱨᱤᱠᱥ ᱫᱚ ᱠᱟᱨᱴᱨᱤᱡᱽ, ᱨᱚᱵᱚᱨ, ᱟᱨ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱥᱟᱫᱷᱚᱱ ᱠᱚ ᱨᱮ ᱢᱮᱱᱟᱜ-ᱟ, ᱡᱟᱦᱟᱸ ᱫᱚ ᱥᱟᱫᱷᱟᱨᱚᱱ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱜᱩᱱ ᱠᱟᱱᱟ, ᱚᱱᱟ ᱫᱚ ᱠᱟᱨᱵᱚᱦᱟᱭᱰᱨᱮᱴ ᱨᱮᱭᱟᱜ ᱨᱩᱠᱷᱤᱭᱟᱹ ᱠᱟᱱᱟ᱾

᱒. ᱢᱤᱫ ᱚᱠᱛᱚ ᱨᱮ ᱢᱤᱫ ᱫᱷᱟᱣ ᱧᱮᱞ ᱢᱮ, ᱟᱨ ᱵᱟᱝ ᱠᱷᱟᱱ ᱩᱱᱠᱩ ᱫᱚ ᱢᱤᱫ ᱫᱷᱟᱣ ᱠᱚ ᱫᱚᱦᱚ ᱠᱟᱜ ᱢᱮ, ᱟᱨ ᱵᱟᱝ ᱠᱷᱟᱱ ᱚᱱᱟ ᱫᱚ ᱢᱤᱫ ᱫᱷᱟᱣ ᱨᱮ ᱫᱚᱦᱚ ᱠᱟᱜ ᱢᱮ ᱾ ᱚᱱᱟ ᱚᱠᱛᱚ ᱨᱮ ᱪᱮᱫ ᱦᱚᱸ ᱵᱟᱝ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ ᱡᱮ ᱱᱚᱣᱟ ᱫᱚ ᱥᱩᱨ ᱨᱮ ᱢᱮᱱᱟᱜᱼᱟ ᱾

᱓) ᱨᱮ, ᱢᱚᱴᱚᱨ ᱵᱚᱫᱚᱞ ᱮᱦᱚᱵ ᱢᱮ ᱟᱨ ᱞᱟᱦᱟ ᱥᱮᱱᱚᱜ ᱞᱟᱦᱟᱨᱮ ᱢᱚᱴᱚᱨ ᱵᱚᱫᱚᱞ ᱢᱮ ᱾ ᱵᱟᱨ ᱪᱟᱸᱫᱚ ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱚᱠᱛᱚ ᱞᱟᱜᱟᱣ ᱠᱟᱛᱮ ᱵᱟᱨ ᱠᱷᱚᱱ ᱵᱟᱹᱲᱛᱤ ᱯᱞᱮᱴ ᱵᱮᱱᱟᱣ ᱫᱚ ᱵᱟᱝ ᱦᱩᱭ ᱫᱟᱲᱮᱭᱟᱜᱼᱟ ᱾ ᱫᱚᱥᱟᱨ ᱟᱨ ᱫᱚᱥᱟᱨ ᱛᱟᱞᱟ ᱨᱮ ᱕ ᱴᱤᱯᱤᱡ ᱠᱷᱚᱱ ᱠᱚᱢ ᱚᱠᱛᱚ ᱾ ᱡᱩᱫᱤ ᱩᱱᱠᱩ ᱯᱩᱭᱞᱩ ᱫᱷᱟᱣ ᱠᱚ ᱧᱮᱞ ᱮᱫᱟ, ᱱᱚᱣᱟ ᱫᱚ ᱞᱟᱦᱟ ᱠᱷᱚᱱ ᱜᱮ ᱞᱟᱦᱟ ᱪᱟᱞᱟᱜ ᱠᱟᱱᱟ ᱟᱨ ᱚᱱᱟ ᱛᱟᱭᱚᱢ ᱥᱤᱯᱤᱝ ᱞᱟᱹᱜᱤᱫ ᱢᱤᱫ ᱚᱠᱛᱚ ᱨᱮ ᱢᱤᱫ ᱫᱷᱟᱯ ᱮᱢ ᱦᱩᱭᱩᱜ ᱠᱟᱱᱟ᱾ ᱮᱴᱟᱜ ᱦᱚᱨ ᱛᱮ ᱥᱮᱱᱚᱜ ᱢᱮ, ᱚᱱᱟ ᱥᱟᱶ ᱥᱟᱶᱛᱮ, ᱚᱱᱟ ᱫᱚ ᱩᱥᱟᱹᱨᱟ ᱜᱮ ᱢᱤᱫ ᱴᱷᱟᱶ ᱨᱮ ᱫᱚᱦᱚ ᱞᱟᱹᱜᱤᱫ ᱠᱩᱨᱩᱢᱩᱴᱩᱭ ᱢᱮ᱾

4. Overload operation is strictly prohibited after normal operation of the liner, and idling time is not more than 15 minutes, so as to avoid damaging the liner.

5. During operation, we should pay attention to observe whether the hollow shaft and oil ring rotate with oil, and whether the temperature of the hollow shaft is normal. ᱡᱩᱫᱤ ᱟᱵᱚ ᱵᱚᱱ ᱧᱮᱞ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ ᱟᱨ ᱚᱱᱟ ᱛᱟᱭᱚᱢ ᱫᱚ ᱵᱟᱝ ᱵᱚᱱ ᱧᱮᱞ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ, ᱟᱵᱚ ᱫᱚ ᱱᱚᱶᱟ ᱠᱚ ᱵᱟᱝ ᱵᱚᱱ ᱧᱮᱞ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ, ᱪᱮᱫᱟᱜ ᱥᱮ ᱚᱱᱟ ᱫᱚ "ᱞᱟᱦᱟ" ᱫᱚ ᱵᱟᱝ ᱠᱟᱱᱟ ᱾ ᱚᱱᱟ ᱚᱠᱛᱚ ᱨᱮ, ᱥᱟᱱᱟᱢ ᱚᱠᱛᱚ ᱨᱮ, ᱟᱨ ᱪᱮᱛᱟᱱ ᱜᱩᱱᱟᱱ ᱡᱤᱱᱤᱥ ᱠᱚ ᱫᱚ ᱪᱮᱛᱟᱱ ᱟᱨ ᱞᱟᱛᱟᱨ ᱨᱮ ᱢᱮᱱᱟᱜ-ᱟ, ᱠᱷᱟᱥ ᱠᱟᱛᱮ ᱟᱹᱨᱥᱤ ᱨᱮ ᱫᱚᱦᱚ ᱠᱟᱛᱮ ᱾

6. During operation, we should pay attention to check whether the cylinder is leaking slurry, carefully observe whether the current, voltage, feeding and water supply are normal, check the temperature of the motor and the spindle every half hour is not more than 60℃, and deal with the problems in time.

7, 6, ᱯᱞᱟᱡᱽᱢᱟ ᱥᱮ ᱛᱟᱞᱟ ᱨᱮ, ᱫᱟᱜ ᱛᱮ ᱛᱤ ᱫᱚᱦᱚ ᱠᱟᱛᱮ, ᱥᱮ ᱛᱤ ᱨᱮ ᱫᱚᱦᱚ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱧᱟᱢ ᱞᱟᱹᱜᱤᱫ ᱜᱚᱲᱚ ᱧᱟᱢ ᱫᱟᱲᱮᱭᱟᱜ-ᱟ ᱾ ᱥᱣᱤᱪ ᱵᱚᱱᱫᱚᱭ ᱢᱮ ᱟᱨ ᱵᱩᱛᱟᱹᱢ ᱞᱤᱱ ᱢᱮ ᱾